Leupold VX-Freedom 3-9×40 Hunt-Plex Scope

The Leupold VX-Freedom 3-9×40 Hunt-Plex combines one of Leupold’s most familiar magnification ranges with a clean Hunt-Plex reticle and a lightweight 1-inch scope body.

Leupold gives this version a 3-9x magnification range, 40mm objective lens and second focal plane reticle. In addition, the scope uses straightforward 1/4 MOA finger-click adjustments without adding electronic illumination or complicated external controls.

The scope weighs approximately 12.2 ounces and measures about 12.49 inches long. Therefore, it keeps the overall design relatively light and compact.

Leupold VX-Freedom 3-9×40 Hunt-Plex Magnification

The Leupold VX-Freedom 3-9×40 Hunt-Plex provides magnification from 3x to 9x.

At 3x, the optic gives the user a wider view. Meanwhile, increasing magnification toward 9x brings smaller details closer.

The 3:1 zoom ratio means the upper setting provides three times the magnification of the lower setting.

Leupold uses this familiar magnification range across several VX-Freedom configurations because it provides a simple variable-power setup without adding excessive size or weight.

Hunt-Plex Reticle

The defining feature of this version is the Hunt-Plex reticle.

Leupold designs the Hunt-Plex with bold tapered pickets, an open center and a finer central aiming area. The upper line also tapers downward without a heavy upper picket, which leaves more of the upper field of view open.

The result is a cleaner reticle than a dense grid-style design.

For that reason, the Hunt-Plex name should remain visible in your Gunvexa title, focus keyphrase and product specifications.

Second Focal Plane Design

The Hunt-Plex sits in the second focal plane.

Therefore, the reticle remains the same apparent size while the viewed image changes as magnification increases or decreases.

Leupold’s 2026 catalog identifies all current VX-Freedom models in this group as second focal plane scopes.

This keeps the reticle visually consistent as the user moves between 3x and 9x.

Bold Tapered Reticle Lines

The Hunt-Plex uses bold tapered pickets around its central aiming area.

These heavier outer sections help make the main reticle easier to identify against changing backgrounds.

Meanwhile, the center remains finer.

Therefore, the reticle combines visible outer references with a less crowded center.

Fine Center

Leupold gives the Hunt-Plex a fine center section.

This keeps the central aiming area from becoming unnecessarily thick.

In addition, the open design prevents the reticle from filling too much of the sight picture.

This difference helps separate Hunt-Plex from some of the other reticles available in the VX-Freedom family.

1/4 MOA Adjustments

The scope uses 1/4 MOA adjustment clicks.

Therefore, four clicks equal one MOA.

Leupold lists this value for both elevation and windage on the VX-Freedom 3-9×40 Hunt-Plex platform.

The straightforward MOA adjustment system also keeps the scope easy to understand without requiring a complex turret layout.

60 MOA Elevation Range

Leupold lists approximately 60 MOA of total elevation adjustment.

The manufacturer also specifies 15 MOA of elevation adjustment per revolution.

These figures should remain separate:

• 1/4 MOA — adjustment per click
• 15 MOA — adjustment per full turret revolution
• 60 MOA — total elevation range

This makes your product specifications easier for visitors to understand.

60 MOA Windage Range

Windage also provides approximately 60 MOA of total adjustment.

Like elevation, each click equals 1/4 MOA.

Leupold lists 15 MOA of windage adjustment per revolution as well.

As a result, both turret controls follow the same basic adjustment pattern.

Finger-Click Adjustments

This VX-Freedom uses finger-click elevation and windage controls.

There is no large exposed tactical-style turret system.

Instead, the design keeps adjustment straightforward.

Leupold also lists a resettable index ring for rezeroing the adjustment reference after the scope has been set.

No ZeroLock or ZeroStop

This Hunt-Plex model does not use the ZeroLock or ZeroStop systems found on several higher-level Leupold scope families.

It also does not include a revolution indicator.

Therefore, I would not copy those Mark 5HD features into this VX-Freedom description.

Keeping those differences clear prevents inaccurate specifications between your Leupold pages.

1-Inch Maintube

The Leupold VX-Freedom 3-9×40 Hunt-Plex uses a 1-inch maintube.

Therefore, compatible scope rings need to fit a 1-inch tube.

Do not confuse the 40mm objective size with the tube diameter.

The 1-inch measurement determines ring compatibility, while 40mm describes the objective lens.

40mm Objective Lens

The scope uses a 40mm objective lens.

This size works naturally with the 3-9x magnification range while keeping the front housing smaller than many 50mm or 56mm scopes.

The exterior objective housing diameter measures approximately 1.83 inches, according to Leupold’s dimension table.

Therefore, remember that the optical objective diameter and outside housing diameter are different measurements.

Fixed 150-Yard Parallax

Leupold sets this model’s parallax at approximately 150 yards.

The scope does not use an adjustable objective or precision side-focus control.

Therefore, there is no separate parallax dial to manage.

For your specification table, I would write:

Parallax: Fixed at 150 yards

rather than describing this model as side-focus adjustable.

Eye Relief

Leupold lists approximately:

4.2 inches of eye relief at low magnification
3.7 inches at high magnification

Therefore, eye relief changes slightly as magnification moves through the range.

The final mounting position should provide a full sight picture without requiring an unnatural head position.

Check the optic at both 3x and 9x before finalizing its position.

Field of View

At 3x, the scope provides approximately 33.1 feet of field of view at 100 yards.

At 9x, this narrows to approximately 13.6 feet at 100 yards.

This is normal because increasing magnification gives a closer view of a smaller area.

Therefore, the lower setting gives the wider view while the upper setting provides greater magnification.

Non-Illuminated Reticle

The Hunt-Plex reticle is non-illuminated.

Therefore, this model does not require a reticle battery.

It also does not include Motion Sensor Technology, electronic reticle leveling or brightness settings.

The simpler design keeps the scope completely optical and mechanical.

No Battery Required

Because there is no illumination, there is no battery to check or replace.

That also keeps the exterior free from an illumination control.

The Hunt-Plex remains visible through the optical system under suitable lighting conditions.

Leupold Advanced Optical System

Leupold builds the VX-Freedom around its Advanced Optical System.

The company describes this system as focusing on useful light transmission, glare reduction, resolution and clarity.

In everyday wording, the optical system aims to provide a clear view as outdoor lighting changes.

That description works better for Gunvexa than filling the product page with exaggerated marketing claims.

Lockable Eyepiece

The VX-Freedom includes a traditional lockable eyepiece.

The user can adjust the focus to suit their eyesight and then use the lock ring to hold that setting.

Once correctly adjusted, the reticle should appear sharp without requiring constant eyepiece changes.

Lightweight 12.2 oz Design

The scope weighs approximately 12.2 ounces, or about 346 grams.

That makes it considerably lighter than many larger scopes with 30mm or 34mm maintubes.

The lighter body also works well with the relatively compact 3-9×40 configuration.

12.49-Inch Length

Leupold lists an overall length of approximately 12.49 inches.

The total available mounting space measures about 5.39 inches.

Leupold further divides that into approximately:

• 2.32 inches front mounting space
• 1.85 inches rear mounting space

These measurements can help when checking whether the scope will fit a particular mounting arrangement.

Waterproof, Fogproof and Shockproof

Leupold describes the VX-Freedom as waterproof, fogproof and shockproof.

The company uses internal sealing and gas-management methods to keep moisture away from the internal optics and help the scope handle changing temperatures and ordinary shocks.

Proper care and correct mounting still matter, however.

Follow Leupold’s instructions when cleaning or installing the optic.

Designed, Machined and Assembled in the USA

Leupold states that its riflescopes, including the VX-Freedom, are designed, machined and assembled in the USA.